Water seeps through the gasket of the tap and the water intake hose: replace the gasket, tighten the connection. The machine has not drained the water: wait until the machine drains the water.

Candy Aquamatic 10T: how to use it, programmes, panel

Tap a row to set that programme on the panel.

No.	Programme	Temp.	Spin	Drawer	Time	End
1	Durable fabrics: cotton, linen; heavily soiled laundry (90 °C), economy (60 °C), delicate items (40 °C) One selector position, three table rows: 90 °C (heavily soiled: sheets, tablecloths, towels, underwear), 60 °C (economy program), 40 °C (coloured laundry, skirts, shirts). The temperature is set with the temperature knob. Note 1 in the table: the program complies with IEC 456.	up to 90 °C	up to 1000	Washing powder, Special additives (liquid): fabric softener, bleach	≈ 1 h 54 min estimate	by itself
2	Durable fabrics: lightly soiled laundry, 30-60 °C Coloured laundry, clothes, shirts, dressing gowns, vests, sheets.	up to 60 °C	up to 1000	Washing powder, Special additives (liquid): fabric softener, bleach	≈ 1 h 25 min estimate	by itself
3	Quick program, 30-40 °C Coloured laundry that runs, clothes, blue jeans. Load up to 2 kg.	up to 40 °C	up to 1000	Washing powder, Special additives (liquid): fabric softener, bleach	≈ 50 min estimate	by itself
4	Intensive rinse Conditioning, fragrance, softening.	no heating	up to 1000	Special additives (liquid): fabric softener, bleach	≈ 33 min estimate	by itself
5	Intensive spin Spin only.	no heating	up to 1000	—	≈ 9 min estimate	by itself
6	Mixed durable fabrics: heavily soiled laundry, 40-60 °C Shirts, sheets, fabrics, newborn laundry, underwear. The spin in the delicate programs is always 400 rpm. If the laundry is very dirty, do not load more than 2 kg.	up to 60 °C	up to 400	Washing powder, Special additives (liquid): fabric softener, bleach	≈ 1 h 20 min estimate	by itself
7	Universal mode: lightly soiled items, 30-50 °C Cotton, mixed fabrics, synthetics. All types of lightly soiled items.	up to 50 °C	up to 400	Washing powder, Special additives (liquid): fabric softener, bleach	≈ 1 h 4 min estimate	by itself
8	Quick program for synthetics, 40 °C Synthetics (nylon, perlon), mixed cotton fabrics: shirts, blouses, coloured (non-running) skirts, curtains.	up to 40 °C	up to 400	Washing powder, Special additives (liquid): fabric softener, bleach	≈ 44 min estimate	by itself
9	Machine-washable wool, 40 °C Only items with a "machine washable" label. No more than 1 kg.	up to 40 °C	up to 400	Washing powder, Special additives (liquid): fabric softener, bleach	≈ 52 min estimate	by itself
10	Delicate rinse (for laundry without spinning) The manual classes this program as for laundry without spinning, but does not say whether the water is drained at the end: if water remains, turn the selector to Z.	no heating	up to 400	Special additives (liquid): fabric softener, bleach	≈ 16 min estimate	by itself
A	Prewash, 40 °C Put the powder straight into the drum (note 2 to the table). The manual does not describe how the program ends or whether the water is drained.	up to 40 °C	—	—	≈ 23 min estimate	by itself
triangle (bleach)	Pre-bleaching Bleach is poured into the special additives compartment. Intended for removing individual stains before the main wash; then add the rest of the laundry and choose a suitable program (p. 21).	no heating	—	Special additives (liquid): fabric softener, bleach	≈ 17 min estimate	by itself
Z	Drain only Draining the water without spinning. According to the manual, to drain without spinning, switch the machine off, set Z and switch on again.	no heating	none	—	≈ 3 min estimate	drain

Button 400 — "400" button (for 8T and 10T). In the durable fabric programs the final spin runs at high speed; the button rules out the high-speed spin, leaving 400 rpm.
Button spin off — Cancels the spin in all cycles. Useful at 90 °C and 60 °C for items with special finishes (pleats) and for delicate items made of mixed fabrics.
Power button on/off — Switching on and off. First set the program selector, then press the button.
Button door — Opening the loading door. After the end of the wash or spin cycle wait 2 minutes: the safety device will not open the door at once.
Temperature knob °C — The knob turns in either direction. Do not set the temperature above the maximum for the chosen program (table on pp. 19-20).
Programme knob program — Turn clockwise only. Do not turn anticlockwise and do not press "on/off" until a program is set.

The machine does not work on any program

The plug is not properly inserted in the socket: insert the plug.
The machine is not switched on: press the "on/off" key.
No electricity: check.
The fuses have blown: check.

Manual, p. 25

It does not fill with water

The door is open: close the door.
The causes from item 1: check.

Manual, p. 25

It does not drain the water

The water supply tap is closed: open the tap.

Manual, p. 25

Water on the floor around the machine

The program selection knob is set wrongly: set the knob to the required position.
The drain hose is kinked: straighten the hose.

Manual, p. 25

It does not spin

Water seeps through the gasket of the tap and the water intake hose: replace the gasket, tighten the connection.
The machine has not drained the water: wait until the machine drains the water.

Manual, p. 25

Strong vibrations during the spin

The spin mode is switched off (only for some models): switch the spin mode on.
The machine is not level: level it by turning the feet.
The transport elements have not been removed: remove them.
The laundry is unevenly distributed in the drum: distribute it evenly.

Manual, p. 25

Marks are stored in this browser only.

Cabinet

For external cleaning do not use abrasives, alcohol or solvents: wiping with a damp cloth is enough.

Dispenser

From time to time wash the container for powder, bleaches and additives: pull it slightly and take it out, rinse the inside with clean water, put it back.

Moving and long stoppage

In an unheated room drain the remaining water from the hoses: with the plug pulled out, release the drain hose, lay it on the floor and lower its end into a low basin; do the same with the fill hose.

Where the data comes from

Candy Aquamatic 6, 6T, 8T, 10T: operating manual (RU), p. pdf 1-25 (нумерация брошюры совпадает) (manual archive)
Model page in the manual archive rembitteh.ru (manual archive)

Assumptions

The order of the selector positions is taken as in the program table: 1-10, A, bleach symbol, Z; the angles are even (27.7 degrees each), the starting point is arbitrary. The panel drawing in the manual is schematic and does not show the marks on the knob.
The divisions of the temperature knob (30, 40, 50, 60, 90 °C) are derived from the ranges in the program table; the actual marks of the knob are not shown in the manual. A "cold wash" position is not mentioned in the manual.
The maximum spin of 1000 rpm is taken from the name 10T and the 600/800/1000 rpm list in the technical data of the family (p. 7): the manual does not name a specific value for the 10T.
The program table gives only the temperature, load and compartments; durations are not given at all, so all the cycle.steps and their order are estimates. According to the text on p. 16: for durable fabrics the rinses alternate with spins and a final spin, for delicates the wash alternates with soaking.
Which compartments are used is taken from the table columns: the first (I) is considered the powder compartment, the second (flower) the special additives compartment; the left-to-right order is taken as in the table header.
The panel colours are nominal: the manual has only a black-and-white drawing, no photo of the machine was used.
The year range is an estimate: the manual does not give the year of manufacture.
The main wash water volume is taken as ~10 l (p. 7).

Not in the manual

The manual does not give program durations or water and energy consumption.
The manual does not say how programs A, bleach and 10 end (with water or with a drain); the data marks "stop" without a guarantee.
The marks and the order of positions on the knobs are not given (the panel drawing is schematic).
The heater power and the maximum spin for the 10T separately are not given: p. 7 refers to the rating plate on the cabinet.
In the program table the row about laundry without spinning refers to the group 10, A, bleach symbol and Z, but the boundaries of the group are not explained in the text.
The specific divisions of the temperature knob 50 °C and 90 °C are derived from the table; the cold wash symbol is not described.

Time is an estimate from the timer steps and heater power: heating 10 l of water from 15 °C to the selected temperature with a 2000 W (not stated in the manual, typical value used) heater. Real time depends on tap water temperature, load and mains voltage.

Aquamatic 10T

1. What do you need?

2. Machine panel

3. What happens

How to start

4. Detergent drawer

Where the data comes from

Assumptions

Not in the manual

Aquamatic 10T

1. What do you need?

2. Machine panel

3. What happens

How to start

4. Detergent drawer

Where the data comes from

Assumptions

Not in the manual

For AI agents